Conical Fermentors
- Product Overview
- Standard Sizes
- Technical Drawing & Quote Request
Conical Fermentors
Conical Fermentors are unique in design, the bottom having a larger diameter than the top. During fermentation, the cap is pushed into the narrow portion of the tank. Theoretically the cap breaks up and allows the CO2 to escape thus falling back into the fermenting juice.
We don't offer any standard sizes or geometries but can design and manufacture to your specifications.
Technical Specs
- Sides and bottom constructed from type 304 stanless steel.
- Roof type 316 stainless steel
- Bottom man-way options
- Racking man-way options
- Top man-way options
- Drain valve type and size options
- Racking valve type and size options
- Sample Tap options
- Closed loop sight glass
- Temperature monitoring and display options
- Leg type and size options
- Option to include must screen behind racking valve for pump-over operation
- Option to include built in cap sprayer
- Option to include automatic pump-over system
Options (See Quote Form)
Note: The table below is for general reference based on a 2:1 height to diameter ratio and a 10 deg inclination based on the midpoint diameter.
| Article Nr. | Content Lt | D mm | H mm | A Deg | F mm | Z mm |
|---|---|---|---|---|---|---|
| CF-1000 | 1,000 | 860mm | 1,700mm | 10 Deg | 820mm | 2,750mm |
| CF-2000 | 2,000 | 1,000mm | 2,200mm | 10 Deg | 820mm | 3,250mm |
| CF-3000 | 3,000 | 1,200mm | 2,500mm | 10 Deg | 820mm | 3,550mm |
| CF-4000 | 4,000 | 1,400mm | 2,700mm | 10 Deg | 820mm | 3,750mm |
| CF-5000 | 5,000 | 1,500mm | 2,900mm | 10 Deg | 820mm | 3,950mm |
| CF-5000 | 6,000 | 1,600mm | 3,000mm | 10 Deg | 820mm | 4,050mm |
