500 to 20,500 Liter Tank Drawing
Features and Options
|
Part Number |
Volume Lt (Gal) |
A mm |
B mm |
C mm |
D mm |
F mm |
H mm |
L mm |
P mm |
Z mm |
|
IE 100 |
100 (26) |
625 |
750 |
500 |
398 |
280 |
1000 |
120 |
560 |
1280 |
|
IE 200 |
200 (52) |
825 |
750 |
500 |
525 |
280 |
1000 |
120 |
560 |
1280 |
|
IE 300 |
300 (78) |
1000 |
750 |
500 |
637 |
280 |
1000 |
120 |
560 |
1280 |
|
IE 400 |
400 (104) |
1000 |
1000 |
500 |
637 |
280 |
1250 |
180 |
650 |
1530 |
|
Part Number |
Volume Lt (Gal) |
A mm |
B mm |
C mm |
D mm |
F mm |
H mm |
L mm |
P mm |
Z mm |
|
IE 100 |
100 (26) |
625 |
750 |
500 |
398 |
280 |
1000 |
120 |
560 |
1280 |
|
IE 200 |
200 (52) |
825 |
750 |
500 |
525 |
280 |
1000 |
120 |
560 |
1280 |
|
IE 300 |
300 (78) |
1000 |
750 |
500 |
637 |
280 |
1000 |
120 |
560 |
1280 |
|
IE 400 |
400 (104) |
1000 |
1000 |
500 |
637 |
280 |
1250 |
180 |
650 |
1530 |
- Heavy Type 304 Stainless Steel Construction (Type 316 on Roof)
- Outside Surface: Marble finish
- Inside Surface: IIId polished
- Integral welded legs (3) and (4) on 7,000 Liters and above
- 5%, 10% or steeper Slopped Bottom
- Ladder Hook
- Lifting Hooks
- (1) Bottom Man-way (mounted upright or sideways) per your
requirements
- Zorzini 1500 (555 by 432mm 21.85" by 17") rectangular man-way (Standard)
- Zorzini 165 (440 by 332mm 17.25" by 13") rectangular man-way
- (2) Man-way latch for vertical mounted man-way
- (3) Racking Port: 1-1/2" to 4" Tri-Clamp Ball or Butterfly Valve
- (4) Drain Port: 1-1/2" to 4" Tri-Clamp Ball Valve
- (5) 1-1/2" Tri-Clamp Pump-over port with Ball Valve
- (6) 1-1/2" Pump-over tube with Ball Valve
- (7) Removable Must Filter Screen behind Pump-over Port
- (8) Removable Self Cleaning Rotating Cap Sprayer
- (9) Removable Sample Valve (NW20 sanitary union)
- (10) Temperature Port with thermo-well, Analog or Digital Gauge or Digital Set Point Controller and Valve
- (11) Cooling jacket to your specifications
- (12) Removable closed loop Sight Glass
- (13) Floating Lid (Tank used as a variable Capacity Tank)
- (14) Mount for Crane
- (15) Crane
- (16) Crank for Crane
- (17) Removable Top
- (18) Top Man-way (back or front location)
- Zorzini 400mm (16") to Zorzini 1500mm (60") man-way with Pressure Relief Valve (15)
- (19) NW50 Vent
- Crane hook on 1,000 Liter and larger Tanks
- (20) Electric Heater control panel
- (21) Electric Heater
- Must Heater
- Jacket Jacket, We can supply heating jacket shape, location and coverage to your specifications.
- (22) Leveling feet
- Oval Man-way (Racking) Not shown on drawing above
- Jaklic (440 by 320mm 17.3" by 12.6")
- Zorzini 170 (440 by 320mm 17.3" by 12.6")
- Laveggi (440 by 310 mm 17.3" by 12.2")
- Longer legs to facilitate use of easy dumping pomice into micro-bins
- Forklift channels that allow movement of tanks for cleaning using either a forklift or pallet jack
- Removable Stainless Steel Ladder
- PID Controller in waterproof box for temperature control
- Attached 900RPM "MUST" pump with controller for automatic pump-over operation
- Port for micro oxidation during pump-over
- Punch-down actuator and controls
- Ladder
Some popular sizes:
Note: The table below is an example of some of the popular tanks, you can order any volume, diameter, height or Diameter to Height Ratio. The only limitation is; maximum diameter is 7' 4" and maximum height is 40 feet.
| Article Number | D:H | Volume Liters (Gal) | D mm | H mm | Z 1 mm | Z2 mm | P mm | F mm | Hip mm | Dp mm |
| IE-UT1300 | 1:1 | 2,000 (528) | 1370 | 1500 | 2395 | 2850 | 800 | 500 | ||
| IE-UT1301 | 1:1 | 2,900 (766) | 1592 | 1500 | 2420 | 2900 | 800 | 500 | ||
| IE-UT1302 | 1:1.1 | 3,300 (872) | 1592 | 1750 | 2670 | 3150 | 800 | 500 | ||
| IE-UT1303 | 1:1.25 | 3,900 (1,030) | 1592 | 2000 | 2920 | 3400 | 900 | 500 | ||
| IE-UT1304 | 1:1.1 | 4,700 (1,242) | 1751 | 2000 | 2950 | 3450 | 900 | 500 |
Pictures of custom tanks
The image to the left shows a 1000 Liter convertible fermentor configured with both automatic punch-down and pump over equipment being tested before shipping to a client in Germany
The above image shows the components that makeup the punch-down system. Note the shape of the punch-down blade, it is shaped to automatically rotate on the up stroke to insure that all the cap is immersed after the cycle is finished.